Toyota Corolla (E120): Roof antenna pole sub–assy

Replacement

Hint

: components:

1. Remove roof antenna pole sub–assy

  1. Remove the roof antenna pole by turning it in the arrow direction in the illustration.
    Share this page:

    Other materials:

    Circuit description
    The ignition switch provides circuit power and the ecm provides the circuit ground that illuminates the mil. Mil operation is checked visually: it should be illuminated when the ignition is first turned on. If the mil is off all of the time or on all of the time, use the procedure below to ...

    General information
    1. Basic dimensions (a) there are two types of dimensions in the diagram. (1) (Three-dimensional distance) straight-line distance between the centers of two measuring points. (2) (Two-dimensional distance) horizontal distance in forward/rearward direction between the centers o ...

    Malfunction in fuel receiver gauge
    Wiring diagram Inspection procedere 1 Inspect fuel sender gage assy Disconnect the connector fuel sender gauge. check the float position between e and f and measure the resistance between terminals 2 and 3 of the connector. Check that the resistance value changes continuously. S ...