Toyota Corolla (E210) 2019-2024 Owners Manual / Before driving / Key information / Using the key (vehicles without a smart key system and with a wireless remote control function)

Toyota Corolla (E210): Using the key (vehicles without a smart key system and with a wireless remote control function)

  1. Releasing
    To release the key, press the button
  2. Folding
    To stow the key, press the button then fold the key.

Using the mechanical key (vehicles with a smart key system)

To take out the mechanical key, slide the release button and take the key out.

The mechanical key can only be inserted in one direction, as the key only has grooves on one side. If the key cannot be inserted in a lock cylinder, turn it over and re-attempt to insert it.

After using the mechanical key, store it in the electronic key.

Carry the mechanical key together with the electronic key.

If the electronic key battery is depleted or the entry function does not operate properly, you will need the mechanical key.

Opening, closing and locking

    Share this page:

    Other materials:

    1. Check that the battery cables are connected to the correct terminals. 2. Disconnect the battery cables when the battery is given a quick charge. 3. Do not perform tests with a high voltage insulation resistance tester. 4. Never disconnect the battery while the engine is running. 5. Check that ...

    Circuit description
    When the brake pedal is depressed, the stop lamp switch assy sends a signal to the cruise control ecu assy. When the cruise control ecu assy receives this signal, it cancels the cruise control. A fail–safe function is provided so that cancel functions normally, even if there is a malfu ...

    Positioning a floor jack
    When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack correctly. Improper placement may damage your vehicle or cause injury. ◆ Front ◆ Rear 1 Take out ...