Toyota Tacoma manuals

BMW 5 Series 2016-2022 Owners Manual: Start/Stop button

Concept

switches drive-ready state on or off.Pressing the Start/Stop button switches drive-ready state on or off.

Steptronic transmission: the drive-ready state is switched on when you depress the brake pedal while pressing the Start/Stop button.

Pressing the Start/Stop button again switches drive-ready state back off and standby state is switched back on.

Driving away

1. Switch on drive-ready state.

2. Apply drive mode.

3. Release the parking brake.

4. Drive away.

Drive-ready state

Safety information

DANGER

If the exhaust pipe is blocked or ventilation is insufficient, harmful exhaust gases can enter into the vehicle. The exhaust gases contain pollutants which are colorless and odorless. In enclosed areas, exhaust gases can also accumulate outside of the vehicle. There is danger to life. Keep the exhaust pipe free and ensure sufficient ventilation.

Warning

An unsecured vehicle can begin to move and possibly roll away. There is a risk of accident.

Before exiting, secure the vehicle against rolling.

In order to ensure that the vehicle is secured against rolling away, follow the following:

NOTICE

In the case of repeated starting attempts or repeated starting in quick succession, the fuel is not burned or is inadequately burned. The catalytic converter can overheat. There is a risk of damage to property. Avoid repeated starting in quick succession.

Switching on drive-ready state

Steptronic transmission

1. Depress the brake pedal.

2. Press the Start/Stop button.

The ignition is activated automatically for a brief time and is stopped as soon as the engine starts.

Most of the indicator/warning lights in the instrument cluster light up for a varied length of time.

Gasoline engine

Depending on the motorization, the full drive power may not be available for approximately 30 seconds after starting the engine. In this case, the vehicle will not accelerate as usual.

Display in the instrument cluster

When drive-ready state is switched on, the tachometer shows the current engine speed.

Switching off drive-ready state

Steptronic transmission

1. Engage selector lever position P with the vehicle stopped.

2. Press the Start/Stop button.

The engine is switched off.

3. Set the parking brake.

Driving
...

Auto Start/Stop function
Concept The Auto Start/Stop function helps save fuel. The system switches off the engine during a stop, for instance in traffic congestion or at traffic lights. Drive-ready state remains switched on. ...

Other materials:

Overview
Button in the vehicle Intelligent Safety Radar sensors The radar sensors are located in the rear bumper. Always keep the bumper in the area of the radar sensors clean and unobstructed. Switching on/off Switching on automatically Blind spot collision warning is automatically activated after depart ...

Circuit description
Refer to dtcs p0100 Dtc no. Dtc detection condition Trouble area P0101 After engine is warmed up, conditions (a) to (d) continue for more than 10 seconds (2 trip detection logic):  engine speed less than 900 rpm  throttle valve fully closed &nbs ...

Overview
Ultrasound sensors With the four side ultrasound sensors, arrows, and the ultrasound sensors of PDC Park Distance Control in the bumpers, the parking spaces are measured and the distances to obstacles determined. Cameras In addition to the ultrasonic sensors, the parking situation during Remote Con ...

© 2011-2022 Copyright www.tcorolla.net