BMW 5 Series 2016-2022 Owners Manual: Shift paddles
Concept
The shift paddles on the steering wheel allow you to shift gears quickly while keeping both hands on the steering wheel.
General information
Shifting
The vehicle only shifts at suitable engine and road speeds.
Short-term manual mode
In selector lever position D, actuating a shift paddle switches into manual mode temporarily.
After conservative driving in manual mode without acceleration or shifting via the shift paddles for a certain amount of time, the transmission switches back to automatic mode.
It is possible to switch into automatic mode as follows:
- Pull and hold right shift paddle.
- In addition to the briefly pulled right shift paddle, briefly pull the left shift paddle.
Continuous manual mode
In selector lever position S, actuating a shift paddle switches into manual mode permanently.
Steptronic Sport transmission
With the appropriate transmission version, the lowest possible gear can be selected by simultaneously activating kickdown and operating the left shift paddles. This is not possible in short-term manual mode.
Shifting
- To shift up: briefly pull right shift paddle.
- To shift down: briefly pull left shift paddle.
- The lowest possible gear can be selected by pulling and holding the left shift paddle.
The selected gear is briefly displayed in the instrument cluster, followed by the current gear.
Displays in the instrument cluster
.png)
The selector lever position is
displayed,
for example P.
Electronic unlocking of the transmission lock
General information
Electronically unlock the transmission lock to maneuver vehicle from a danger area.
Unlocking is possible, if the starter can spin the engine.
Before unlocking the transmission lock, set the parking brake to prevent the vehicle from rolling away.
Engaging selector lever position N
1. Press and hold down brake pedal.
2. Press the Start/Stop button. The starter must audibly start. Hold the Start/Stop button pressed.
3. With your free hand, press the button on the selector lever, arrow 1, and press the selector lever into selector lever position N and hold, arrow N, until selector lever position N is displayed in the instrument cluster.
A Check Control message is displayed.
4. Release Start/Stop button and selector lever.
5. Release brake, as soon as the starter stops.
6. Maneuver the vehicle from the danger area and secure it against moving on its own.
For additional information, see the chapter on tow-starting and towing.
Sport program M/S
Concept
The shifting points and shifting times in the
Sport program are designed for a sportier driving
style. The transmission, for instance shifts up
later and the shifting times are shorter.
Activa ...
Launch Control
Concept
Launch Control enables optimum acceleration
on surfaces with good traction under dry surrounding
conditions.
General information
The use of Launch Control causes premature
component wear since ...
Other materials:
Auto Start/Stop function
Concept
The Auto Start/Stop function helps save fuel.
The system switches off the engine during a
stop, for instance in traffic congestion or at traffic
lights. Drive-ready state remains switched on.
The engine starts automatically for driving off.
General information
After each engine start using ...
Without Surround View:
rearview camera
Concept
The rearview camera provides assistance in
parking and maneuvering backwards. The area
behind the vehicle is shown on the Control Display.
Safety information
Warning
The system cannot serve as a substitute for the
driver's personal judgment in assessing the
traffic conditions. There is a ris ...
Front no.2 Speaker assy
Replacement
Hint: components:
1. Remove front armrest assy lh
2. Remove power window regulator master switch assy (w/ power window)
3. Remove front armrest base panel upper lh (w/o power window)
4. Remove front door window regulator handle assy (w/o power window)
5. Remove front door lower ...
