Toyota Corolla (E210) 2019-2024 Owners Manual / Driving / Using the driving support systems / RSA (Road Sign Assist)
Toyota Corolla (E210): RSA (Road Sign Assist)
The RSA system detects specific road signs using the front camera and/or navigation system (when speed limit information is available) and warns the driver via displays and buzzers.
WARNING
■For safe use
- Driving safely is solely the responsibility of the driver. Pay careful attention to the surrounding conditions in order to ensure safe driving.
- Do not rely solely upon the RSA. The RSA assists the driver by providing road sign information, but it is not a replacement for the driver's own vision and awareness. Driving safely is solely the responsibility of the driver. Pay careful attention to the surrounding conditions in order to ensure safe driving.
■Situations in which the RSA should not be used
- When it is necessary to disable the system
■Situations in which the system may not operate properly
- Situations in which the sensors may not operate properly
Display Function
- When the front camera detects a sign or information of a sign is available from the navigation system, the sign will be displayed on the display.
- Multiple signs can be displayed.
Depending on the specifications of the vehicle, the number of displayed signs may be limited.
■Operating conditions of sign display
Signs will be displayed when the following conditions are met:
- The system has detected a sign
In the following situations, a displayed sign may stop being displayed:
- When a new sign has not been detected for a certain distance
- When the system determines that the road being driven on has changed, such as after a left or right turn
■Situations in which the display function may not operate properly
In the following situations, the RSA system may not operate properly and may not detect signs or may display the incorrect sign. However, this does not indicate a malfunction.
- When a sign is dirty, faded, tilted or bent
- When the contrast of an electronic sign is low
- When all or part of a sign is hidden by a tree, utility pole, etc.
- When a sign is detected by the front camera for a short amount of time
- When the driving state (turning, changing lanes, etc.) is judged incorrectly
- When a sign is immediately after a freeway junction or in an adjacent lane just before merging
- When stickers are attached to the rear of a preceding vehicle
- When a sign similar to a system compatible sign is detected as a system compatible sign
- When a speed limit sign for a frontage road is within detection range of the front camera
- When driving around a roundabout
- When a sign intended for trucks, etc. is detected
- When the navigation system map data is out of date
- When the navigation system cannot be used
In this case, the speed limit signs displayed on the multi-information display and navigation system display may differ.
Notification function
In the following situations, the RSA system will output a warning to notify the driver.
- If the vehicle speed exceeds the speed warning threshold of the speed limit sign displayed on the display, the sign display will be emphasized and a buzzer will sound.
- When the RSA system detects a do not enter sign and determines that the vehicle has entered a no-entry area, the do not enter sign displayed on the display will flash and a buzzer will sound.
■Operating conditions of the notification functions
- Excess speed notification function
This function will operate when the following condition is met:
- A speed limit road sign is recognized by the system.
- No entry notification function
This function will operate when all of the following conditions are met:
- More than one no entry road signs are recognized by the system simultaneously.
- The vehicle is passing between no entry road signs recognized by the system.
Types of road signs supported
- The following types of road signs can be displayed.
However, non-standard or recently introduced traffic signs may not be displayed.
Speed limit
Do Not Enter
No U-turn
No Turn On Red
Stop
Yield
Warning
- Depending on the specifications of the vehicle, signs may be displayed overlapping.
Duplicate display example
Changing RSA settings
The following settings of the RSA can be changed through customize settings.
Other materials:
Brake fluid
Bleeding
Notice:
wash the brake fluid off immediately if it comes into contact with any painted
surface.
Hint:
if any work is done on the brake system or if air in the brake lines is
suspected, bleed the air from the system.
1. Fill reservoir with brake fluid
fluid: sae j1703 or fmvss no. ...
Lower ball joint assy front lh
Replacement
Hint: components:
1. Inspect lower ball joint assy front lh
Jack up front side of the vehicle.
check the rattle of the lower ball joint assy front lh.
2. Remove front wheel
3. Remove front axle hub lh nut
sst 09930–00010
4. Disconnect speed sensor front lh (w/ ...
Circuit description
The p squib (2nd step) circuit consists of the airbag sensor assy center and
instrument panel passenger
airbag assy.
It causes the srs to deploy when the srs deployment conditions are satisfied.
Dtc b1185/57 is recorded when a short is detected in the p squib (2nd step)
circuit.
Wiri ...