Toyota Tacoma manuals

Toyota Corolla Repair Manual: Circuit description

The microphone of the grass breakage sensor is built in the security indicator. When this microphone senses breakage of grass, the grass breakage sensor ecu sends the signal of this breakage to the tvip ecu.

Wiring diagram

Inspection procedure

Glass breakage sensor circuit
...

Inspection procedure
1 Check security indicator light Set the system in 30 seconds after filliping the security indicator to check if the alarm is triggered. 2 Check glass breakage sensor ecu (glass breakage ...

Other materials:

Inspection procedure
1 Inspect park/neutral position switch assy Disconnect the park/neutral position switch connector.  measure resistance according to the value(s) in the table below when the shift lever is moved to each position. Standard: 2 Check harness and connector(park/neutral position ...

Replacement
Hint: installation is in the reverse order of the removal. But the installation is indicated only when it has a point. In the lh side, work in the same procedure as in the rh side. 1. Disconnect battery negative terminal 2. Remove front seat assembly rh 3. Remove front seat inner be ...

Installing child restraints using a seat belt
■ Rear-facing - Infant seat/convertible seat 1 Place the child restraint system on the rear seat facing the rear of the vehicle. 2 Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted. 3 Fully extend the shou ...

© 2011-2022 Copyright www.tcorolla.net