Toyota Tacoma manuals

BMW 5 Series 2016-2022 Owners Manual: With parking assistant and Steptronic transmission: emergency braking function, Active PDC

BMW 5 Series 2016-2022 Owners Manual / Driver assistance systems / PDC Park Distance Control / With parking assistant and Steptronic transmission: emergency braking function, Active PDC

Concept

The emergency braking function of PDC initiates an emergency braking in case of acute risk of collision.

General information

Due to system limits, a collision cannot be prevented under all circumstances.

The function is available below walking speed when driving in reverse or rolling backward.

A press of the accelerator pedal interrupts the braking intervention.

After emergency braking to a stop, further creeping toward an obstacle is possible. To creep toward the obstacle, lightly press the accelerator pedal and release it again.

If the accelerator pedal is heavily depressed, the vehicle drives off as usual. Manual braking is possible at any time.

The system uses the ultrasound sensors of PDC and parking assistant.

Safety information

Warning

The system cannot serve as a substitute for the driver's personal judgment in assessing the traffic conditions. There is a risk of accident.

Adjust driving style to traffic conditions. Watch traffic and vehicle surroundings closely and actively intervene where appropriate.

Activating/deactivating the system

Via iDrive:

1. "My Vehicle".

2. "Vehicle settings".

3. "Parking".

4. "Active PDC with braking interv."

5. "Active PDC with braking interv." The setting is stored for the driver profile currently used.

With Parking Assistant: side protection

Concept

The system warns of obstacles on the side of the vehicle.

General information

The system uses the ultrasound sensors of PDC and parking assistant.

Display

To protect the sides of the vehicle, obstacle

To protect the sides of the vehicle, obstacle markings are displayed on the sides of the vehicle.

Limits of side protection

The system only displays stationary obstacles that were previously detected by sensors while passing them.

The system does not detect whether an obstacle moves later on. If the vehicle is stationary, the markings are shown in black after a certain time.

The area next to the vehicle must be newly captured.

Warning
Signal tones General information An intermittent tone indicates when the vehicle is approaching an object. For instance, if an object is detected to the left rear of the vehicle, a signal tone sounds ...

System limits
Safety information Warning The system is designed to operate in certain conditions and circumstances. Due to conditions or other factors, the system may not respond. There may be a risk of accident o ...

Other materials:

Eco drive mode (if equipped)
Press the switch. Suitable for enhancing the fuel economy, because the torque corresponding to the accelerator pedal depression amount can be generated more smoothly than it is in normal conditions and the operation of the air conditioning system (heating/cooling) will be minimized. Press th ...

Inspection procedure
1 Check p/t squib(lh) circuit(airbag sensor assy center front seat outer belt assy lh) Disconnect the negative () terminal cable from the battery, and wait at least for 90 seconds.  disconnect the connectors between the airbag sensor assy center and the seat belt pretensioner ...

Onvehicle inspection
1. Inspect front axle hub bearing  remove the front wheel.  separate the front disc brake caliper assy .  remove the front disc.  inspect the bearing backlash. Using a dial indicator, check the backlash near the center of the axle hub. Maximum: 0.05 Mm (0. ...

2011-2022 Copyright www.tcorolla.net