Toyota Corolla (E170): Using a Bluetooth® Phone

The hands-free system is a function that allows you to use your cellular phone without touching it.

This system supports Bluetooth®. Bluetooth® is a wireless data system that allows the cellular phone to wirelessly connect to the hands-free system and make/receive calls.

Before making a phone call, check the connection status, battery charge, call area and signal strength. If a Bluetooth® device cannot be connected, check the connection status on the phone screen. If the device is not connected, either register or reconnect it.

Share this page:

Other materials:

Inspection procedure
1 Inspect transmission wire(sl) Disconnect the transmission wire connector from the transaxle.  measure the resistance according to the value(s) in the table below. Standard: 2 Check harness and connector(transmission wire – ecm) Connect the transmission wire c ...

Replacement
1. Disconnect battery negative terminal 2. Remove engine under cover rh 3. Remove starter assy Disconnect the starter connector.  open the terminal cover. remove the nut, then disconnect the starter wire.  remove the 2 bolts, then remove the starter. 4. Install starter a ...

Initialization
1. Reset memory Caution: perform the reset memory (at initialization) when replacing the automatic transaxle assy, engine assy or ecm. Notice: hand–held tester only Turn the ignition switch off.  connect the hand–held tester to the dlc3.  turn the ignition switch to th ...