Toyota Corolla (E120): Cruise control switch circuit

Share this page:

Other materials:

Inspection procedure
1 Inspect fuse(stop) Turn the ignition switch to off.  remove the stop fuse from the instrument panel j/b.  check continuity of the stop fuse. Ok: continuity 2 Inspect stop lamp switch assy Disconnect the stop lamp switch assy connector. check continuity betw ...

On–vehicle inspection
1. Install lspv gauge (sst) and bleed air  remove the bleeder plugs from the front and rear brake cylinder.  install the lspv gauge (sst), and bleed the air. Sst 09709–29018 2. Raise master cylinder pressure and check rear wheel cylinder pressure Hint: when inspectin ...

Inspection
1. Charcoal canister assy Visually check the charcoal canister for cracks or damage. Inspect the charcoal canister operation.  Plug the vent port with the cap.  While holding the purge port closed, blow air (1.76 Kpa, 18 gf/cm2, 0.26 Psi) into the evap port and ...