Toyota Corolla (E210): Driving support system information display

■ Driving support system information

Select to display the operational status of the following systems:

  • LTA (Lane Tracing Assist)
  • LDA (Lane Departure Alertl)
  • Dynamic radar cruise control

■ Navigation system-linked display (if equipped)

Select to display the following navigation system-linked information:

  • Route guidance to destination
  • Compass display (heading- up display)

Audio system-linked display

Select to enable selection of an audio source or track on the meter using the meter control switches.

This menu icon can be set to be displayed/not displayed inVehicle information display.

Vehicle information display

■ Drive information

Displays drive information such as the following:

  1. Drive information type
  2. Drive information items

Displays the following depending on which drive information type and drive information items were selected in.

  • After start
    • Distance: Displays the distance driven since engine start
    • Elapsed time: Displays the elapsed time since engine start
    • Average vehicle speed: Displays the average vehicle speed since engine start
  • After reset
    • Distance: Displays the distance driven since the display was reset*
    • Elapsed time: Displays the elapsed time since the display was reset*
    • Average vehicle speed: Displays the average vehicle speed since the display was reset*

*: To reset, display the desired item and press and hold the meter control switch. meter control switch.

Settings display

■ Meter display settings that can be changed

  • Language
    Select to change the language displayed.
  • Units
    Select to change the units of measure displayed.
  • Eco Driving Indicator Light Select to enable/disable the Eco Driving Indicator Light.
  • Fuel economy display

Select to change the average fuel consumption display between after start/after reset.

Select to display/not display the audio system linked display.

Select to change the displayed content of the following:

  • Drive information type

Select to change the drive information type display between after start/after reset.

  • Drive information items

Select to set the first and second items of the drive information display to any of the following: average vehicle speed/distance/elapsed time.

  • Pop-up display

Select to enable/disable pop-up displays for each relevant system.

  • Multi-information display off

Select to turn the multi-information display off.

To turn the multi-information display on again, press any of the following meter control switches .

  • Default setting

Select to reset the meter display settings to the default setting.

■Suspension of the settings display

  • Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place.
  • If a warning message is displayed, operation of the settings display will be suspended.

WARNING

■Cautions during setting up the display

If the engine is running when changing the display settings, ensure that the vehicle is parked in a place with adequate ventilation.

In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.

This may lead to death or a serious health hazard.

NOTICE

■During setting up the display

To prevent battery discharge, ensure that the engine is running while setting up the display features.

    Share this page:

    Other materials:

    Circuit description
    The camshaft position sensor (g22+ signal) consists of a magnet, iron core and pickup coil. The g22+ signal plate has 3 teeth on its outer circumference and is installed on the camshaft timing pulley. When the camshafts rotate, the protrusion on the signal plate and the air gap on the pi ...

    Maintenance data (fuel, oil level, etc.)
    Dimensions and weight *1:Unladen vehicles *2:Vehicles without 18-inch tires *3:Vehicles with 18-inch tires for Guam and Saipan *4:Vehicles with 18-inch tires except for Guam and Saipan *5:For Guam and Saipan Seating capacity Vehicle identification ■ Vehicle identification number The vehicle iden ...

    Receiving a phone call
    Answering the phone Press the off-hook switch. Refusing a call Press the on-hook switch. Receiving a call when on another call Press the off-hook switch. Pressing the off-hook switch again returns you to the previous call. Adjusting the ringtone volume when receiving a call Change the ringto ...