Toyota Corolla (E170): Using the steering wheel switches

The steering wheel switches can be used to operate a connected cellular phone

.

Operating a telephone using the steering wheel switches

■ Steering wheel switches on the right hand side

1 Off hook switch
• Make a call
• Receive a call
• Display “Phone” screen

2 On hook switch
• End a call
• Refuse a call

■ Steering wheel switches on the left hand side

■ Steering wheel switches on the left hand side

1 Volume switch
• Increase/Decrease the volume • Press and hold:

Continuously increase/ decrease the volume

2 Back switch
• Return to the previous screen

3 Cursor switch
• Select a list/tab

4 Enter switch
• Select an item

Bluetooth® phone settings

    Share this page:

    Other materials:

    Mass or volume air flow circuit
    Dtc p0100 mass or volume air flow circuit Dtc p0102 mass or volume air flow circuit low input Dtc p0103 mass or volume air flow circuit high input Circuit description The maf (mass air flow) sensor measures the amount of air flowing through the throttle valve. The ecm uses this information ...

    Circuit description
    Refer to dtc p0130 Hint: the ecm provides a pulse width modulated control circuit to adjust current through the heater. The heated oxygen sensor heater circuit uses a relay on the b+ side of the circuit. Monitor description The ecm uses the heated oxygen sensor information to regulate t ...

    Overhaul
    1. Remove generator pulley Sst 09820–63010 (09820–06010, 09820–06020) Hint: Hold sst 1 – a with a torque wrench, and tighten sst 1 – b clockwise to the specified torque. Torque: 39 nvm (398 Kgf·cm, 29 ft·lbf) Notice: check that sst is secured to the rotor shaft. ...