Toyota Corolla Repair Manual: Vehicle speed sensor ”a”

Inspection procedure

Hint: if different dtcs related to different systems that have terminal e2 as the ground terminal are output simultaneously, terminal e2 may be open. If dtc p0441 (purge flow), p0446 (vsv f ...

Circuit description

The vehicle equipped with abs detects a vehicle speed using the stability control ecu and wheel speed sensor. This sensor monitors a wheel rotation speed and sends the signal to the ecu. The s ...

Other materials:

For vehicles equipped with catalytic converter
Caution: if large amount of unburned fuel flows into the converter, it may cause overheating and a fire hazard. To prevent this, observe the following precautions. Use only unleaded gasoline.  avoid prolonged idling. Avoid running the engine at idle speed for more than 20 minutes. ...

Replacement
1. Disconnect battery negative terminal 2. Remove engine under cover rh 3. Remove starter assy Disconnect the starter connector.  open the terminal cover. remove the nut, then disconnect the starter wire.  remove the 2 bolts, then remove the starter. 4. Install starter a ...

Front suspension arm sub–assy lower no.1 Lh
Replacement Hint: components: 1. Remove front wheel 2. Disconnect front stabilizer link assy lh (lh (a/t) position) 3. Disconnect front stabilizer link assy rh (lh (a/t) position) Hint: remove the rh side by the same procedures as the lh side. 4. Separate front suspension arm sub–assy lower ...