Toyota Corolla Repair Manual: Lubrication

Radiator assy

Replacement 1. Drain coolant 2. Separate radiator hose inlet 3. Separate radiator hose outlet 4. Separate oil cooler inlet tube no.1 5. Separate oil cooler outlet tube no.1 6. Remove radiator as ...

Lubrication system

On–vehicle inspection 1. Check engine oil level  after warming up the engine and then 5 minutes after the engine stops, oil level should be between the ”l” and ”f” marks on the oil leve ...

Other materials:

Inspection procedure
1 Inspect dlc3 terminal voltage(tc terminal) Turn the ignition switch to on.  measure voltage between terminals tc and cg of dlc3. Ok: voltage: 10 – 14 v 2 Check harness and connector(dlc3 – body ground) Check for open and short circuit in harness and connector between ...

Inspection procedure
1 Inspect terminal voltage(idl) Remove the cruise control ecu assy with connector still connected.  disconnect the ecm connector.  turn the ignition switch to on.  measure voltage between terminal 13 (idl) of cruise control ecu assy connector and body ground when the ...

Circuit description
The crankshaft position sensor (ne signal) consists of a magnet, iron core and pickup coil. The ne signal plate (crankshaft position sensor plate) has 34 teeth and is installed on the crankshaft. The ne signal sensor generates 34 signals for each engine revolution. This sensor monitors a p ...