Activating the voice activation system
1. Press the button on the
steering
wheel.
2. Wait for the signal.
3. Say the command.
The symbol on the Control Display
indicates
that the voice activation system is
active.
No other commands may be available. In this case, operate the function via iDrive.
Terminating the voice activation system
Press the button on the steering
wheel
or ›Cancel‹.
Possible commands
General information
Most menu items on the Control Display can be spoken as commands.
Commands from other menus can also be spoken.
You can also select list entries such as phone list entries via voice activation. Read these list entries out loud exactly as they are shown in the respective list.
Displaying possible commands
The following is displayed in the top area of the Control Display:
Example: opening the tone settings
The commands of the menu items are spoken just as they are selected via the Controller.
1. Switch on the Entertainment sound output, if needed.
2. Press the button on the steering
wheel.
3. ›Media and radio‹.
4. ›Tone‹.
Help on the voice activation system
To have the available spoken instructions read out loud: ›Voice commands‹.
Information for Emergency Requests
Do not use the voice activation system to initiate an Emergency Request. In stressful situations, the voice and vocal pitch can change. This can unnecessarily delay the establishment of a phone connection.
Instead, use the SOS button close to the interior mirror.
Inspection procedure
1 Check wire harness(dlc3 – airbag sensor assy center)
Turn the ignition switch to the lock position.
disconnect the aribag sensor assy center connector.
measure the resistance according to the value(s) in the
table below.
Standard:
2 Check wire harness(cg of dlc3 ...
Braking safely
General information
The vehicle is equipped with the Antilock Brake
System ABS as a standard feature.
Perform an emergency stop in situations that require
such.
Steering is still responsive. You can still avoid any
obstacles with a minimum of steering effort.
Pulsation of the brake pedal and soun ...
Torque converter clutch and drive plate (atm)
Inspection
1. Inspect torque converter clutch assy
Inspect the one–way clutch.
Set sst into the inner race of the one–way clutch.
Sst 09350–32014 (09351–32010)
set sst so that it fits in the notch of the converter
hub and outer race of the one–way clutch.
Sst 09350 ...