Toyota Corolla (E210) 2019-2026 Owners Manual / Before driving / Opening, closing and locking the doors

Toyota Corolla (E210): Opening, closing and locking the doors

Share this page:

Other materials:

Replacement
1. Disconnect battery negative terminal 2. Remove engine under cover rh 3. Remove starter assy Disconnect the starter connector.  open the terminal cover. remove the nut, then disconnect the starter wire.  remove the 2 bolts, then remove the starter. 4. Install starter a ...

Circuit description
The vapor pressure sensor, vsv for canister closed valve (ccv), vsv for pressure switching valve are used to detect abnormalities in the evaporative emission control system. The ecm decides whether there is an abnormality in the evaporative emission control system based on the vapor pressur ...

Check and replace ecu
Notice: start an inspection of the connector from the backside of the connector on the wire harness side with the connector connected to the ecu. When no measurement condition is specified, perform the inspection with the engine stopped and also the ignition switch on. First check the ec ...