Toyota Corolla (E210): Maintenance requirements

To ensure safe and economical driving, day-to-day care and regular maintenance are essential. It is the owner's responsibility to perform regular checks.

Toyota recommends the maintenance below.

■Repair and replacement

It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system.

If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the warranty coverage.

■Allow inspection and repairs to be performed by a Toyota dealer

  • Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operation of all systems on your vehicle.
  • Keep a copy of the repair order. It proves that the maintenance that has been performed is under warranty coverage. If any problem should arise while your vehicle is under warranty, your Toyota dealer will promptly take care of it.

WARNING

■If your vehicle is not properly maintained

Improper maintenance could result in serious damage to the vehicle and possible death or serious injury.

■Handling of the battery

  • Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. Work in a well ventilated area.
  • Oils, fuels and fluids contained in vehicles as well as waste produced by component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Avoid exposure and wash any affected area immediately.
  • Battery posts, terminals and related accessories contain lead and lead compounds which are known to cause brain damage.

    Wash your hands after handling.

General maintenance

General maintenance should be performed on a daily basis. This can be done by yourself or by a Toyota dealer.

Scheduled maintenance

Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.

For details about maintenance items and schedules, refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement".

■Resetting the message indicating maintenance is required

After the required maintenance is performed according to the maintenance schedule, please reset the message.

To reset the message, follow the procedure described below:

4.2-inch display

1. Press of the meter or control switch to select . of the meter control switch to select .

2. Press to select or Settings to select "Vehicle Settings" and then press and hold .

3. Press to select or to select "Scheduled Maintenance" and then press .

4. Press to select or and then press . to select "Yes" and then press .

A message will be displayed on the multi-information display when the reset procedure has been completed.

7-inch display

1. Press of the meter or control switch to select . of the meter control switch to select .

2. Press to select or Settings to select "Vehicle Settings" and then press and hold .

3. Press to select or to select "Scheduled Maintenance" and then press .

4. Press to select or and then press . to select "Yes" and then press .

A message will be displayed on the multi-information display when the reset procedure has been completed.

Do-it-yourself maintenance

You can perform some maintenance procedures by yourself.

Please be aware that do-it-yourself maintenance may affect warranty coverage.

The use of Toyota repair manuals is recommended.

For details about warranty coverage, refer to the separate "Owner's Warranty Information Booklet" or "Owner's Manual Supplement".

    Share this page:

    Other materials:

    Under hood
    General maintenance 1. General notes maintenance requirements vary depending on the country. Check the maintenance schedule in the owner’s manual supplement. Following the maintenance schedule is mandatory. Determine the appropriate time to service the vehicle using either miles driv ...

    Evap monitor (vacuum pressure monitor) (continued)
    Preconditions The monitor will not run unless: mil is off. Fuel level is approximately 1/2 to 3/4. Altitude is 7800 feet (2400 m) or less.* Engine coolant temperature (ect) is between 40°f and 95°f (4.4 °C and 35 °C). Intake air temperature (iat) is between 40°f and 95 ...

    Safety Connect services
    ■ Automatic Collision Notification In case of either airbag deployment or severe rear-end collision, the system is designed to automatically call the response center. The responding agent receives the vehicle's location and attempts to speak with the vehicle occupants to assess the level of emerge ...