Toyota Corolla (E120): Supplemental restraint system

Preparation

Sst

Recomended tools

Recomended tools

Equipment

Equipment

Seat belt

    Share this page:

    Other materials:

    On–vehicle inspection
    1. Inspect turn signal flasher relay circuit Disconnect the connector from the turn signal flasher relay and inspect the connector on wire harness side as shown in the chart. Standard: Connect the connector to the turn signal flasher and inspect the wire harness side connector ...

    Adjustment
    1. Check and adjust brake pedal height Inspect brake pedal height. Pedal height from asphalt sheet: m/t: 134.9 – 144.9 Mm (5.311 – 5.703 In.) A/t: 136.0 – 146.0 Mm (5.353 – 5.747 In.)  Disconnect the connector from the stop lamp switch.  Remove the stop lamp ...

    Coolant
    Replacement 1. Drain coolant Caution: to avoid the danger of being burned, do not remove the radiator cap while the engine and radiator are still hot, as fluid and steam can be blown out under pressure.  remove the radiator cap.  loosen the radiator and engine drain plugs, a ...