Concept
If the vehicle is in idle state, it is switched off. All power consumers are deactivated.
General information
The vehicle is in idle state prior to opening from the outside and after exiting and locking.
Safety information
Warning
An unsecured vehicle can begin to move and possibly roll away. There is a risk of accident.
Before exiting, secure the vehicle against rolling.
In order to ensure that the vehicle is secured against rolling away, follow the following:
Warning
Unattended children or animals in the vehicle can cause the vehicle to move and endanger themselves and traffic, for instance due to the following actions:
There is a risk of accidents or injuries. Do not leave children or animals unattended in the vehicle.
Take the vehicle key with you when exiting and lock the vehicle.
Automatic idle state
The idle state is automatically established under the following conditions:
The idle state is not automatically established while a phone call is active.
Establishing idle state when opening the front doors
Via iDrive:
1. "My Vehicle".
2. "Vehicle settings".
3. "Doors/Key".
4. "Turn off after door opening".
Manual idle state
To establish idle state in the vehicle after end of trip:
Press and hold the button until
the OFF indicator on the instrument
cluster goes out.
Transmission valve body assy (atm)
Replacement
1. Remove engine under cover lh
2. Drain automatic transaxle fluid
remove the drain plug, gasket and drain atf.
install a new gasket and drain plug.
Torque: 17.5 Nvm (178 Kgf·cm, 13 ft·lbf)
3. Remove automatic transaxle oil pan sub–assy
Remove the 18 bolt ...
Inspection procedure
1 Check p squib circuit(airbag sensor assy center – instrument
panel passenger airbag assy)
Disconnect the negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
disconnect the connectors between the airbag sensor
assy center and the instrument panel pas ...
Replacement
1. Remove proportioning valve assy
Using sst, disconnect the 5 brake tubes from the proportioning
valve assy.
Sst 09023–00100
Remove the 2 bolts and proportioning valve assy from the
body.
2. Install proportioning valve assy
Install the proportioning valve assy wit ...