Toyota Corolla (E210): Display and menu icons
■ Display
- Driving support system status display area
Displays an image when the following
systems are operating and a
menu icon other than 
is
selected:
- LTA (Lane Tracing Assist)
- LDA (Lane Departure Alert)
- Dynamic radar cruise control
- RSA (Road Sign Assist) (if equipped)
- Content display area
By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed. The multi-information display can also be used to change display settings and other vehicle settings.
Warning or advice pop-up displays are also displayed in certain situations.
■ Menu icons
The menu icons will be displayed
by pressing the 
or
meter control switch.
Driving information display
Driving support system
information display
Audio system-linked display
Vehicle information display
Settings display
Warning message display
■Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.
WARNING
■Caution for use while driving
- When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle.
- Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle.
Changing the meter display
The multi-information display is operated using the meter control switches.
: Select menu
icons
: Change displayed
content, scroll up/down the
screen and move the cursor
up/down- Press: Enter/Set
Press and hold: Reset/Display customizable items - Return to the previous screen
- Call sending/receiving and history display
Linked with the hands-free system, sending or receiving call is displayed.
For details regarding the hands-free system, refer to the "MULTIMEDIA OWNER'S MANUAL".
Other materials:
Changing audio source
1 Press the “AUDIO” button to display the audio source selection screen.
If the audio source selection screen is not displayed, press the “AUDIO” button
again.
2 Select the desired audio source.
1 Select the desired audio source then
or
to reorder.
...
Circuit description
This circuit turns on the magnetic clutch inside the actuator during cruise
control operation according to the
signal from the ecu. If a malfunction occurs in the actuator or speed sensor,
etc. During cruise control operation,
the rotor shaft between the motor and control plate is released.
...
License plate lamp assy
Replacement
1. Remove luggage compartment lock cylinder & key set
2. Remove luggage compartment door garnish outside
3. Remove license plate lamp assy
Pull the license plate light assy to the side of vehicle as
shown in the illustration and release the claw.
disconnect the c ...