Toyota Corolla Repair Manual: Chain sub–assy

Overhaul

1. Remove oil filler cap sub–assy Remove the oil filler cap from the cylinder head cover. 2. Remove oil filler cap gasket Using a screwdriver, remove the gasket from the oil filler ...

Components

...

Other materials:

When stopping the engine with the shift lever in a position other than P (vehicles with a continuously variable transmission)
If the engine is stopped with the shift lever in a position other than P, the engine switch will not be turned off but instead be turned to ACCESSORY mode. Perform the following procedure to turn the switch off: 1 Check that the parking brake is set. 2 Shift the shift lever to P. ► Vehi ...

Replacement
1. Remove battery 2. Remove battery carrier Remove the 4 bolts and battery carrier. 3. Disconnect floor shift cable transmission control shift Remove the nut from the control shaft lever.  disconnect the control cable from the control shaft lever.  remove the clip a ...

Circuit description
The rear heated oxygen sensor is used to monitor oxygen concentration in the exhaust gas. For optimum catalytic converter operation, the air fuel mixture must be maintained near the ideal ”stoichiometric” ratio. The heated oxygen sensor output voltage changes suddenly in the vicinity of the ...