Toyota Corolla (E170): Bulb locations

■ Front

1 Headlight high beams

1 Headlight high beams 2 Front turn signal/parking lights 3 Front side marker lights 4 Front fog lights (if equipped)

■ Rear

1 Back-up lights

1 Back-up lights
2 Rear turn signal lights 3 Stop/tail/rear side marker lights 4 License plate lights

    Share this page:

    Other materials:

    Tire rotation
    Rotate the tires in the order shown. Front To equalize tire wear and extend tire life, Toyota recommends that tire rotation is carried out at the same interval as tire inspection. Vehicles with a tire pressure warning system: Do not fail to initialize the tire pressure warning system after tire ...

    On–vehicle inspection
    1. Horn button assy (vehicles not involved in collision) Check the diagnostic system . visually check the following item with the horn button assy (with airbag) installed in the vehicle. Check cuts, minute cracks or marked discoloration on the horn button assy top surface and in the ...

    Circuit description
    Refer to dtc p0130 Hint: the ecm provides a pulse width modulated control circuit to adjust current through the heater. The heated oxygen sensor heater circuit uses a relay on the b+ side of the circuit. Monitor description The ecm uses the heated oxygen sensor information to regulate t ...