Toyota Tacoma manuals

Toyota Corolla Owners Manual: Taking out the jack

1 Remove the luggage floor cover.

2 Take out the jack.

2 Take out the jack.

1 For tightening
2 For loosening

Taking out the spare tire

Location of the spare tire, jack and tools
1 Luggage floor cover 2 Wheel nut wrench 3 Jack handle 4 Jack attachment* 5 Jack 6 Spare tire 7 Tool tray *: The jack attachment is used when raising your vehicle with a floor jack. CAUTION ...

Taking out the spare tire
1 Remove the luggage floor cover. 2 Remove the tool tray. 3 Loosen the center fastener that secures the spare tire. CAUTION ■When storing the spare tire Be careful not to catch fingers ...

Other materials:

Inspection procedure
1 Inspect ecm(+b voltage) Turn the ignition switch on.  measure the voltage between the terminals of the e4 and e6 ecm connectors. Standard: 2 Check harness and connector(ecm Ц body ground) Disconnect the e4 ecm connector. check the resistance between the wire ha ...

Inspection procedure
Hint: this dtc chart is on the premise that the engine is cranked normally. If the engine is not cranked, proceed to the problem symptoms table on page 05Ц42. Read freeze frame data using the hand-held tester or the obd ii scan tool. Freeze frame data records the engine conditions wh ...

Stopping
► Automatic transmission or continuously variable transmission 1 With the shift lever in D, depress the brake pedal. 2 If necessary, set the parking brake. If the vehicle is to be stopped for an extended period of time, shift the shift lever to P or N. (, 174, 176) ►  Manual ...

© 2011-2022 Copyright www.tcorolla.net