Toyota Corolla Owners Manual: Before towing
The following may indicate a problem with your transmission. Contact your Toyota dealer before towing.
● The engine is running but the vehicle will not move.
● The vehicle makes an abnormal sound.
If your vehicle needs to be towed
If towing is necessary, we recommend having your vehicle towed by your Toyota
dealer or a commercial towing service, using a lift-type truck or flat bed truck.
Use a safety chain system for all tow ...
Emergency towing
If a tow truck is not available in an emergency, your vehicle may be temporarily
towed using a cable or chain secured to the emergency towing eyelet. This should
only be attempted on hard surfaced ...
Other materials:
System description
The ecm uses the signals from the throttle position sensor, air–flow meter
and crankshaft position sensor
to monitor the engagement condition of the lock–up clutch.
Then the ecm compares the engagement condition of the lock–up clutch with the
lock–up schedule in the
ecm memory to detect mec ...
Inspection procedure
1 Inspect fuse(ecu–ig fuse)
Remove ecu–ig fuse from the instrument panel j/b.
check continuity of ecu–ig fuse.
Ok:
continuity
2 Inspect battery
Ok:
voltage: 10 – 14 v
3 Inspect skid control ecu connector(ig1 terminal voltage)
In case of using hand–held tester:
...
Circuit description
Refer to dtc p0120
Dtc no.
Dtc detection condition
Trouble area
P0121
The following condition is met 4 times. After the vehicle speed
has exceeded 19 mph (30 km/h) once, the throttle position
sensor output value is out of normal range when the throttle
...