Toyota Corolla (E120) 2002–2008 Repair Manual / Rear suspension / Stabilizer bar rear
Toyota Corolla (E120): Stabilizer bar rear
Replacement
Hint
: components:
1. Remove stabilizer bar rear
- Remove the 2 bolts, nuts and stabilizer bar.
2. Install stabilizer bar rear
- Install the 2 bolts, nuts and stabilizer bar.
Torque: 195 nvm (1,990 Kgf·cm, 144 ft·lbf)
H
int
: install the stabilizer bar so that the mark is positioned onthe rear right side of the vehicle.
Other materials:
Coolant
Replacement
1. Drain coolant
Caution:
to avoid the danger of being burned, do not remove the radiator
cap while the engine and radiator are still hot, as fluid
and steam can be blown out under pressure.
remove the radiator cap.
loosen the radiator and engine drain plugs, a ...
Inspection procedure
Hint:
read freeze frame data using the hand-held tester or the obd ii scan tool.
Freeze frame data records the
engine conditions when a malfunction is detected. When troubleshooting, it is
useful for determining whether
the vehicle was running or stopped, the engine was warmed up or not, the ...
Screen for general settings
1 Press the “SETUP” button.
2 Select “General” on the “Setup” screen.
1 “English”, “Français” or “Español” can be selected.
2 On/off can be selected to sound beeps.
3 Select to change the screen color.
4 Select to change the keyboard layout.
5 The animatio ...