Toyota Corolla (E120) 2002–2008 Repair Manual / Cruise control / Speed control main switch assy
Toyota Corolla (E120): Speed control main switch assy
Replacement
1. Disconnect battery negative terminal
2. Inspect place front wheels facing straight ahead
3. Remove horn button assy
4. Remove steering wheel assy
sst 09950–50013 (09951–05010, 09952–05010, 09953–05020, 09954–05021)
5. Remove speed control main switch assy
- Remove the 2 screws and cruise control main switch assy.
6. Center spiral cable
7. Install steering wheel assy
8. Inspect steering wheel center point
9. Inspect horn button assy
10. Install horn button assy
11. Inspect srs warning light
Other materials:
Changing engine switch modes
Modes can be changed by pressing the engine switch with the brake pedal (continuously
variable transmission) or clutch pedal (manual transmission) released. (The mode
changes each time the switch is pressed.)
► Vehicles without a multi-information display
Off*
The emergency flashers ca ...
On–vehicle inspection
Notice:
”cold” and ”hot” in these sentences express the temperature of the coils
themselves. ”Cold” is from
–10 c (14 f) to 50 c (122 f) and ”hot” is from 50 c (122 f) to 100 c (212 f).
1. Inspect ignition coil (with igniter) and spark test
confirm dtc.
Notice:
...
Lubrication system
On–vehicle inspection
1. Check engine oil level
after warming up the engine and then 5 minutes after the engine
stops, oil level should be between
the ”l” and ”f” marks on the oil level gage.
If low, check for leakage and add oil up to the ”f” mark.
Notice:
do not ...