Toyota Corolla (E120) 2002–2008 Repair Manual / Diagnostics / Combination meter / Malfunction in tachometer
Toyota Corolla (E120): Malfunction in tachometer
Wiring diagram
Inspection procedure
- Check output value of ecm.
- Connect the hand–held tester to dlc3.
- Turn the ignition switch to on and push the hand–held tester main switch on.
- Select the data list mode on the hand–held tester.
2 Inspect combination meter assy
(Reference) inspection using oscilloscope
- check the input signal waveform.
- Remove the combination meter assy with connectors still connected.
- Connect the oscilloscope to the terminals c9–19 of combination meter assy and body ground.
- Start engine.
- Check the signal waveform.
3 Check harness and connector(between ecm and combination meter assy)
- Remove the combination meter.
- check the continuity between terminals 5 (tach) of ecm and c9–19 of combination meter connector.
Standard: there is continuity.
Check and replace ecm
Other materials:
Engine assembly
Inspection
1. Inspect coolant
2. Inspect engine oil
3. Inspect battery
4. Inspect air cleaner filter element sub–assy
5. Inspect spark plug
6. Inspect fan and generator v belt
Hint:
you don’t need to check the belt deflection because auto tensioner is adopted.
7. Inspect ignition ti ...
Front suspension
Preparation
Sst
Recomended tools
Equipment
...
Brake fluid
Bleeding
Notice:
wash the brake fluid off immediately if it comes into contact with any painted
surface.
Hint:
if any work is done on the brake system or if air in the brake lines is
suspected, bleed the air from the system.
1. Fill reservoir with brake fluid
fluid: sae j1703 or fmvss no. ...