Toyota Corolla (E120) 2002–2008 Repair Manual / Automatic transmission / trans / Automatic transaxle fluid (atm)
Toyota Corolla (E120): Automatic transaxle fluid (atm)
On–vehicle inspection
1. Check the fluid level
Hint
: drive the vehicle so that the engine and transaxle are at normal operating temperature. Fluid temperature: 70 – 80 °c (158 – 176 °f)
- park the vehicle on a level surface and set the parking brake.
- with the engine idling and the brake pedal depressed, shift the shift lever into all ranges from p to l position and return to p position.
- pull out the dipstick and wipe it clean.
- ) push it back fully into the pipe.
- pull it out and check that the fluid level is in the hot position.
If there are leaks, it is necessary to repair or replace o–rings, fipgs, oil seals, plugs or other parts.
Other materials:
Using a Bluetooth® Phone
The hands-free system is a function that allows you to use your cellular phone
without touching it.
This system supports Bluetooth®. Bluetooth® is a wireless data system that allows
the cellular phone to wirelessly connect to the hands-free system and make/receive
calls.
Before making a ph ...
Positioning a floor jack
When using a floor jack, follow the instructions in the manual provided with
the jack and perform the operation safely.
When raising your vehicle with a floor jack, position the jack correctly.
Improper placement may damage your vehicle or cause injury.
◆ Front
◆ Rear
1 Take out ...
Circuit description
The p squib (2nd step) circuit consists of the airbag sensor assy center and
instrument panel passenger
airbag assy.
It causes the srs to deploy when the srs deployment conditions are satisfied.
Dtc b1185/57 is recorded when a short is detected in the p squib (2nd step)
circuit.
Wiri ...