Toyota Corolla (E120): Replacement

Hint

: components:

1. Remove floor shift shift lever knob sub–assy

2. Remove console panel upper

3. Remove parking brake hole cover sub–assy

4. Remove console box sub–assy rear

5. Separate floor shift cable transmission control shift

  1. Separate the end of the shift cable from the shift lever assy.

  1. Using a screwdriver, release the cable outer spring.
  2.  turn the lock, separate the shift cable from the shift lever retainer.

6. Separate floor shift cable transmission control select

  1. Separate the end of the select cable from the shift lever assy.

  1. Using a screwdriver, release the cable outer spring.
  2.  turn the lock, separate the select cable from the shift lever retainer.

7. Remove floor shift shift lever assy

  1. Remove the 4 bolts and shift lever assy.

8. Install floor shift shift lever assy

  1. Install the shift lever assy with the 4 bolts.

    Torque: 12 nvm (120 Kgf·cm, 9 ft·lbf)

9. Connect floor shift cable transmission control shift

  1. Connect the shift cable to the retainer of shift lever assy, turn the lock.

    Notice

    : the projecting part of the lock should face upward when the shift cable is installed.

  2.  install the cable outer spring to the lock.

    Notice

    : make sure that after installation the cable outer spring is moved to the place shown in the illustration.

  1. Connect the end of the shift cable to the shift lever assy.

10. Connect floor shift cable transmission control select

  1.  connect the select cable to the retainer of shift lever assy, turn the lock.

    Notice

    : the projecting part of the lock should face upward when the select cable is installed.

  2.  install the cable outer spring to the lock.

    Notice

    : make sure that after installation the cable outer spring is moved to the place shown in the illustration.

  1. Connect the end of the select cable to the shift lever assy.
    Share this page:

    Other materials:

    Circuit description
    When a misfire occurs in the engine, hydrocarbons (hc) enter the exhaust in high concentrations. If this hc concentration is high enough, there could be an increase in exhaust emissions levels. High concentrations of hc passing through the catalyst also cause to temperature of the catalyst to ...

    Trip information
    ■ Switching the display Items displayed can be switched by pressing the display change button. ■ Odometer Displays the total distance the vehicle has been driven. ■ Trip meter A/trip meter B Displays the distance the vehicle has been driven since the meter was last reset. ...

    Exhaust gas precautions
    Harmful substance to the human body is included in exhaust gases if inhaled. WARNING Exhaust gases include harmful carbon monoxide (CO), which is colorless and odorless. Observe the following precautions. Failure to do so may cause exhaust gases enter the vehicle and may lead to an accident caused ...