Toyota Corolla (E120): Cruise control system

On–vehicle inspection

1. Check play of accelerator auto drive cable assy

  1. Push the wire into the cable so as not to move the throttle link and put a mark on the position shown in the illustration.

  1. Pull the wire and check the moved distance of the mark.

2. Adjust play in accelerator auto drive cable assy

  1. Changing the double nut position shown by the arrows, adjust the play to the standard value.

    Standard: 2 – 6 mm (0.079 – 0.236 In.)

3. Adjust play in accelerator control cable assy

  1. Remove the cruise control actuator cover and adjust the play in the accelerator control cable assy by changing the double nut position.
    Share this page:

    Other materials:

    Terminals of ecu
    1. Inspect integration relay Disconnect the connector from the integration relay. check the continuity between each terminal of the disconnected connector and the body ground, as shown in the illustration and table. Standard: If the result is not as specified, the vehicle’s ...

    Windshield wiper switch assy
    Replacement 1. Remove steering column cover lwr Remove 3 screws and steering column cover lwr. 2. Remove windshield wiper switch assy Disconnect the connecter of the windshield wiper switch.  release the claw and pull out the windshield wiper switch assy as shown in the ...

    Bluetooth® audio/phone
    The following can be performed using Bluetooth® wireless communication: ■ Bluetooth® audio The Bluetooth® audio system enables you to enjoy music played on a portable player from the vehicle speakers via wireless communication. This audio system supports Bluetooth®, a wireless data sy ...