Toyota Corolla (E120) 2002–2008 Repair Manual / Diagnostics / ABS with EBD system / Right/Left front speed sensor circuit / Circuit description
Toyota Corolla (E120): Circuit description
The speed sensor detects wheel speed and transmits the appropriate signals to the ecu. These signals are used for control of the abs control system. Each of the front and rear rotors has 48 serrations.
When the rotors rotate, the magnetic field generated by the permanent magnet in the speed sensor induces an ac voltage.
Since the frequency of this ac voltage changes in direct proportion to the speed of the rotor, the frequency is used by the ecu to detect the speed of each wheel.
Hint
: Dtc no. C0200/31 and c1235/35 is the right front speed sensor.
Dtc no. C0205/32 and c1236/36 is the left front speed sensor.
Wiring diagram
Other materials:
Overhaul
Hint: components:
1. Remove rear wheel
2. Remove spare wheel cover assy
3. Remove rear floor finish plate
4. Remove luggage compartment trim cover inner lh
5. Remove rear shock absorber with coil spring
Support the rear axle beam with jack.
Remove the 2 nuts and bolt.
...
Meter display
■ Locations of gauges and meters
Engine coolant temperature gauge
Displays the engine coolant temperature
Outside temperature
Displays the outside temperature within the range of -40ºF (-40ºC) to 140ºF
(60ºC)
Analog speedometer/Tachometer
This setting can be changed on the setting scr ...
Registering a Bluetooth® phone for the first time
To use the hands-free system, it is necessary to register a Bluetooth® phone
with the system.
Once the phone has been registered, it is possible to use the hands-free system.
For details about registering a Bluetooth® device
1 Turn the Bluetooth® connection setting of your cellular phone on. ...