Toyota Tacoma manuals

BMW 5 Series 2016-2022 Owners Manual: Electronic oil measurement

BMW 5 Series 2016-2022 Owners Manual / Engine oil / Electronic oil measurement

General information

The electronic oil measurement has two measuring principles:

When making frequent short-distance trips or using a dynamic driving style, for instance when taking curves aggressively, regularly perform a detailed measurement.

Monitoring

Concept

The engine oil level is monitored electronically while driving and can be shown on the Control Display.

If the engine oil level is outside its permissible operating range, a Check Control message is displayed.

that the engine A red indicator light indicates that the engine oil pressure is too low.

Functional requirements

A current measured value is available after approx.

30 minutes of normal driving.

Displaying the engine oil level

Via iDrive:

1. "My Vehicle".

2. "Vehicle status".

3. "Engine oil level".

The engine oil level is displayed.

System limits

When making frequent short-distance trips or using a dynamic driving style, it may not be possible to calculate a measured value. In this case, the measured value for the last, sufficiently long trip is displayed.

Detailed measurement

Concept

The engine oil level is checked when the vehicle is stationary and displayed via a scale.

If the engine oil level is outside its permissible operating range, a Check Control message is displayed.

General information

During the measurement, the idle speed is increased somewhat.

Functional requirements

Via iDrive:

1. "My Vehicle".

2. "Vehicle status".

3. 4. "Engine oil level"

4. "Measure engine oil level".

5. "Start measurement".

The engine oil level is checked and displayed via a scale.

General information, Safety information
General information The engine oil consumption is dependent on your driving style and driving conditions. Therefore, regularly check the engine oil level after refueling by taking a detailed measurem ...

Adding engine oil
General information Only add engine oil when the message is displayed in the instrument cluster. The quantity to be added is indicated in the message shown on the Control Display. Only add suitable t ...

Other materials:

Changing audio source
1 Press the AUDIO button to display the audio source selection screen. If the audio source selection screen is not displayed, press the AUDIO button again. 2 Select the desired audio source. 1 Select the desired audio source then or to reorder. ...

Circuit description
The throttle position sensor is mounted in the throttle body and detects the throttle valve opening angle. When the throttle valve is fully closed, a voltage of approximately 0.3 To 1.0 V is applied to terminal vta of the ecm. The voltage applied to terminal vta of the ecm increases in pro ...

Inspection procedure
1 Check unlock warning switch assy Disconnect the key unlock warning switch connector.  check the continuity between the terminals of the key unlock warning switch connector, as shown in the illustration and table. Standard: 2 Check wire harness (tvip ecu unlock warning ...

2011-2022 Copyright www.tcorolla.net