Front door belt moulding assy lh
Replacement
Hint:
the installation procedures are the removal procedures in reverse
order.
Use the same procedures for the rh side and lh side.
1. Remove front armrest assy lh
2. Remove power window regulator master switch assy (w/ power window)
3. Remove front armrest base panel up ...
Circuit description
Refer to dtc p0115
Dtc no.
Dtc detection condition
Trouble area
P0125
If the engine coolant temperature (ect) was less than –6.6 °C
(20 °F) when starting the engine, and 20 minutes after the engine
start, the ect sensor still indicates below 20 °C (68 °F)
...
Installation with LATCH system
1 Widen the gap between the seat cushion and seatback slightly.
► Type A
2 Latch the hooks of the lower straps onto the LATCH anchors. If the child restraint
has a top tether strap, the top tether strap should be latched onto the top tether
strap anchor.
For owners in Canada: The symbol ...