Toyota Corolla Repair Manual: Vane pump assy
On–vehicle inspection
1. Inspect drive belt
Visually check the belt for excessive wear, frayed cords,
etc.
If any defect is found, replace the drive belt.
Hint:
cracks on the rib side of a belt are considere ...
Components
...
Other materials:
Pre–check
1. Pre–check
Check that the cruise control actuator assy, acceleration wire,
accelerator auto drive cable assy, and
link assy are installed correctly and that the wire and link are securely
connected.
check that the operating movement of the acceleration pedal, cruise
control actuat ...
Brake fluid
■ Checking fluid level
The brake fluid level should be between the “MAX” and “MIN” lines on the tank.
■ Adding fluid
Make sure to check the fluid type and prepare the necessary item.
1 Slide and lift up the rubber strip to partially remove it as shown.
2 Disconnect the claws a ...
Inspection procedure
1 Prepare for inspection
Disconnect the negative (–) terminal cable from the battery, and wait at
least for 90 seconds.
remove the horn button assy .
disconnect the connector of the instrument panel passenger airbag assy
.
disconnect the connector of the front seat ...