Toyota Corolla Repair Manual: Clutch unit (mtm)
Overhaul
1. Drain clutch fluid
2. Disconnect clutch release cylinder to flexible hose tube
Using sst, disconnect the flexible hose tube.
Sst 09023–00100
Hint:
use a container to catch the fluid. ...
Components
...
Other materials:
Evap monitor (vacuum pressure monitor)
Notice:
a cold soak must be performed prior to conducting the drive pattern to complete
the internal pressure
readiness monitor.
Cold soak preconditions
The monitor will not run unless:
mil is off.
Fuel level is approximately 1/2 to 3/4.
Altitude is 7800 feet (2400 m) or less.
...
Hood
Release the lock from the inside of the vehicle to open the hood.
1 Pull the hood lock release lever.
The hood will pop up slightly.
2 Pull up the auxiliary catch lever and lift the hood.
3 Hold the hood open by inserting the support rod into the slot.
CAUTION
■Pre-driving check
C ...
Inspection
1. Headlamp dimmer switch assy
Inspect light control switch continuity.
Measure the resistance according to the value(s) in
the table below.
Standard:
Inspect headlight dimmer switch continuity.
Measure the resistance according to the value(s) in
the tabl ...