Toyota Corolla (E170): Dialing

1 Display the phone screen. 2 Select the “Dial Pad” tab and enter a phone number.

To delete the input phone number, select For the first digit, you can enter “+” by selecting “*” for a while..

For the first digit, you can enter “+” by selecting “*” for a while.

3 Press the wheel or select . switch on the steering wheel or select Dialing from the contacts list.

    Share this page:

    Other materials:

    Inspection
    1. Inspect sliding roof limit switch Inspect the sliding roof limit switch continuity. Standard: If the continuity is not as specified, replace the switch. 2. Inspect sliding roof drive gear sub–assy Connect the positive (+) lead from the battery to terminal 2 and the ne ...

    Inspection procedure
    1 Check p squib circuit(airbag sensor assy center – instrument panel passenger airbag assy) Disconnect the negative (–) terminal cable from the battery, and wait at least for 90 seconds.  disconnect the connector between the airbag sensor assy center and the instrument panel ...

    Evap monitor (vacuum pressure monitor)
    Notice: a cold soak must be performed prior to conducting the drive pattern to complete the internal pressure readiness monitor. Cold soak preconditions The monitor will not run unless: mil is off. Fuel level is approximately 1/2 to 3/4. Altitude is 7800 feet (2400 m) or less. ...