Toyota Corolla (E170): Wheel selection

When replacing wheels, care should be taken to ensure that they are equivalent to those removed in load capacity, diameter, rim width and inset*.

Replacement wheels are available at your Toyota dealer.

*: Conventionally referred to as “offset”.

Toyota does not recommend using the following:

● Wheels of different sizes or types ● Used wheels
● Bent wheels that have been straightened

    Share this page:

    Other materials:

    Speed sensor front lh
    Replacement Hint: replace the rh side by the same procedure as the lh side. 1. Remove front wheel 2. Remove front fender liner lh 3. Remove speed sensor front lh Disconnect the speed sensor wire harness clamp from the body.  disconnect the speed sensor connector. Remo ...

    Changing engine switch modes
    Modes can be changed by pressing the engine switch with the brake pedal (continuously variable transmission) or clutch pedal (manual transmission) released. (The mode changes each time the switch is pressed.) ► Vehicles without a multi-information display Off* The emergency flashers ca ...

    Chassis
    On–vehicle inspection 1. Inspect steering linkage  check the steering wheel freeplay .  check the steering linkage for looseness or damage.  Check that the tie rod ends do not have excessive play.  Check that the dust seals and boots are not damaged.  Chec ...