Registering a Bluetooth® device in the system allows the system to function. The following functions can be used for registered devices:
Using automatic mode
1 Press .
The dehumidification function begins to operate. Air outlets and fan speed are
automatically adjusted according to the temperature setting.
2 Adjust the temperature setting.
3 To stop the operation, press again.
■ If the system is operated manually in automatic mode
If the fa ...
Inspection procedure
1 Check low pitched horn assy
Connect the positive (+) lead from the battery to the terminal
and negative (–) lead to the horn body, and check that
the horn blows.
2 Check relay (marking: horn)
Remove the relay from the engine room j/b.
check the horn relay continu ...
Inspection procedure
1 Inspect transmission wire(s1)
Disconnect the transmission wire connector from the
transaxle.
measure the resistance according to the value(s) in the
table below.
Standard:
2 Check harness and connector(transmission wire – ecm)
Connect the transmission connecto ...