Toyota Corolla (E170): Using automatic mode
1 Press 
.
The dehumidification function begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature setting.
2 Adjust the temperature setting.
3 To stop the operation, press 
again.
■ If the system is operated manually in automatic mode
If the fan speed setting or air flow modes are operated, the automatic mode indicator goes off. However, automatic mode for functions other than that operated are maintained.
Other materials:
Inspection procedure
Hint:
start the inspection from step 1 in case of using the hand–held tester and start
from step 2 in case of not
using the hand–held tester.
1 Read value of hand–held tester(front speed sensor)
Select the datalist mode on the hand–held tester.
check that there is no differe ...
Overhaul
1. Drain brake fluid
Notice:
wash the brake fluid off immediately if it comes into contact with any painted
surface.
2. Remove air cleaner cap sub–assy
3. Remove brake master cylinder sub–assy
disconnect the brake fluid level switch connector from
master cylinder reservoir subâ ...
Starting off on a steep uphill
► Automatic transmission or continuously
variable transmission
1 Make sure that the parking brake is set and shift the shift lever to D.
2 Gently depress the accelerator pedal.
3 Release the parking brake.
► Manual transmission
1 With the parking brake firmly set and the clutch pe ...