Toyota Corolla (E120): Throttle body assy

Components

Removal & installation and disassembly & reassembly

Removal & installation and disassembly & reassembly

1. Drain coolant

2. Remove cylinder head cover no.2

  1. Remove 2 nuts, 2clips and the cylinder head cover no. 2.

3. Remove air cleaner cap sub–assy

  1. Disconnect the maf connector.
  2.  disconnect the vsv connector.
  3.  disconnect 3 vacuum hoses, as shown in the illustration.
  4.  loosen an air cleaner hose clump and disconnect an air cleaner hose no. 1.
  5.  remove the air cleaner cap.

4. Remove air cleaner hose no.1

5. Separate accelerator control cable assy

6. Remove throttle body assy

  1. Disconnect an throttle position sensor connector.
  2.  disconnect a throttle body isc valve assy connector.
  3.  disconnect a pcv hose.

  1. Disconnect 2 water by–pass hoses.

  1. Remove 5 bolts, 2 nuts, throttle body bracket and throttle body. (Transaxle m/t)

  1. Remove 3bolts, 2nuts and throttle body. (Transaxle a/t)

  1. Remove 2 bolts and accelerator cable bracket.

7. Remove E.F.I. Throttle position sensor

  1. Remove 2 screws and the throttle position sensor as shown in the illustration.

8. Remove thlottle body idle speed controlvalve assy

  1. Remove 3 screws and the idle speed control valve assy.
  2.  remove the gasket from the throttle body.

9. Install thlottle body idle speed control valve assy

  1. Install a new gasket on the throttle body.
  2.  install the idle speed control valve assy with 3 screws.

    Torque: 3.7 Nvm (38 kgf·cm, 33 in.Vlbf)

10. Install E.F.I. Throttle position sensor

  1. Check that the throttle valve is fully close.
  2.  insert the throttle position sensor to the throttle body with it turned counterclockwise by 30 to 90 against the fully close valve position.
  3.  by turning the throttle position sensor clockwise, tighten 2 screws.

    Torque: 2.0 Nvm (20 kgf·cm, 18 in.Vlbf)

11. Install throttle body assy

  1. Install the accelerator control bracket with 2 bolts.

    Torque: 13 nvm (133 kgf·cm, 9.6 Ftvlbf)

  1. Install a new gasket on the intake manifold, as shown in the illustration.

  1. Install the throttle body with 5 bolts and 2 nuts.(Transaxle m/t) torque:
    a 30 nvm (306 kgf·cm, 22 ftvlbf) b 13 nvm (133 kgf·cm, 9.6 Ftvlbf)

  1. Install the throttle body with 3 bolts and 2 nuts.(Transaxle a/t) torque: 30 nvm (306 kgf·cm, 22 ftvlbf)

  1. Connect 2 water by–pass hoses to the throttle body.

  1. Connect the pcv hose to the throttle body.
  2.  connect the throttle body idle speed control valve assy connector to the throttle body.
  3.  connect the throttle position sensor connector to the throttle body.

12. Install air cleaner cap sub–assy

  1. Install the air cleaner cap.
  2.  connect the air cleaner hose.

  1. Connect 3 vacuum hoses, as shown in the illustration.
  2.  connect the vsv connector.
  3.  connect the intake air flow meter connector.

13. Install cylinder head cover no.2

  1. Install the cylinder head cover no. 2 With 2 nuts and 2 clips.

    Torque: 7.0 Nvm (71 kgf·cm, 62 in.Vlbf)

14. Add coolant

15. Check engine coolant leak

    Share this page:

    Other materials:

    Inspection
    1. Inspect outer mirror switch assy Inspect the mirror switch continuity.  Left side for left/right adjustment switch: inspect the mirror switch continuity Standard (left side): If the result is not as specified, replace the switch assembly.  Right side for left/r ...

    For your information
    Main Owner’s Manual Please note that this manual applies to all models and explains all equipment, including options. Therefore, you may find some explanations for equipment not installed on your vehicle. All specifications provided in this manual are current at the time of printing. Howeve ...

    Data list/active test
    1. Data list Hint: according to the data list displayed by the obd ii scan tool or hand–held tester, you can read the value of the switch, sensor, actuator and so on without parts removal. Reading the data list as the first step of troubleshooting is one method to shorten labor time. W ...