Toyota Corolla (E120) 2002–2008 Repair Manual / Diagnostics / Combination meter / The ambient temperature does not display
Toyota Corolla (E120): The ambient temperature does not display
Wiring diagram
Inspection procedure
1 Inspect outer ambient temperature sensor
- Remove cooler (ambient temp. Sensor) thermistor.
- measure resistance between terminals 1 and 2 of cooler
(ambient temp. Sensor) thermistor connector at each temperature.
Resistance:
at 0 c (0 f) : 9.097 – 9.701 KΩ at 25 c (77 f) : 2.725 – 2.865 KΩ
Hint
: as the temperature increases, the resistance decreases.
Resistance:
2 Check harness and connector
Check and replace combination meter assy
Other materials:
Inspection procedure
1 Check low pitched horn assy
Connect the positive (+) lead from the battery to the terminal
and negative (–) lead to the horn body, and check that
the horn blows.
2 Check relay (marking: horn)
Remove the relay from the engine room j/b.
check the horn relay conti ...
Eco drive mode (if equipped)
Press the switch.
Suitable for enhancing the fuel economy, because the torque corresponding to
the accelerator pedal depression amount can be generated more smoothly than it is
in normal conditions and the operation of the air conditioning system (heating/cooling)
will be minimized.
Press th ...
Emission inspection and maintenance (I/M) programs
Some states have vehicle emission inspection programs which include OBD (On
Board Diagnostics) checks. The OBD system monitors the operation of the emission
control system.
If the malfunction indicator lamp comes on
The OBD system determines that a problem exists somewhere in the emission cont ...