Toyota Corolla (E170): Stopping the engine
1 Stop the vehicle.
2 Continuously variable transmission: Shift the shift lever to P.
Manual transmission: Shift the shift lever to N.
3 Set the parking brake. 4 Press the engine switch.
5 Vehicles without a multi-information display: Release the brake pedal (continuously variable transmission) or clutch pedal (manual transmission) and check that the smart key system indicator light (green) is off.
Vehicles with a multi-information display: Release the brake pedal (continuously variable transmission) or clutch pedal (manual transmission) and check that “POWER ON” on the multi-information display is off.
Other materials:
Precaution
Caution:
the corolla is equipped with srs, which comprises a driver airbag,
front passenger airbag
and side airbag. Failure to carry out service operations in the correct
sequence could cause
the srs to unexpectedly deploy during servicing, possibly leading to a
serious accident. Fu ...
Pre–check
1. Diagnosis check
Starting diagnosis mode (service check mode)
turn off the audio system and turn the ig switch to
acc. While pressing the preset switches ”1” and ”6”
at the same time, press ”cd” 3 times.
Reference:
beep sound is given 3 times and the sys ...
Shift solenoid ”a” performance
(shift solenoid valve s1)
Dtc p0751 shift solenoid ”a” performance
(shift solenoid valve s1)
System description
The ecm uses signals from the vehicle speed sensor and crankshaft position
sensor to detect the actual
gear position (1st, 2nd, 3rd or o/d gear).
Then the ecm compares the actual gear with the shift sc ...