Toyota Corolla Owners Manual: Steering wheel audio switches
Some audio features can be controlled using the switches on the steering wheel.
Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system.
Operating the audio system using the steering wheel switches
1 Volume switch:
• Press: Increases/decreases volume
• Press and hold: Continuously increases/decreases volume
2 Radio mode:
• Press: Selects a radio station
• Press and hold: Seeks up/ down CD, MP3/WMA disc, Bluetooth®, iPod or USB mode:
• Press: Selects a track/file/song • Press and hold: Selects a folder or album (MP3/WMA disc, Bluetooth®, iPod or USB)
3 “MODE” switch:
• Press: Turns the power on, selects an audio source
• Press and hold: Mutes or pauses the current operation.
To cancel the mute or pause, press and hold again.
CAUTION
■To reduce the risk of an accident
Exercise care when operating the audio switches on the steering wheel.
Audio system types
► Without Multimedia system
► With Multimedia system
► With navigation system
Owners of models equipped with a navigation system should refer to the “Navigation
System Owner& ...
AUX port/USB port
Connect an iPod, USB memory device or portable audio player to the AUX port/USB
port as indicated below. Press to select
“iPod”, “USB” or “AUX”.
Connecting using the AUX port/USB port
■ i ...
Other materials:
Inspection procedure
Hint:
read freeze frame data using the hand-held tester or the obd ii scan tool.
Freeze frame data records the
engine conditions when a malfunction is detected. When troubleshooting, it is
useful for determining whether
the vehicle was running or stopped, the engine was warmed up or not, the ...
Manual shifting test
1. Perform manual shifting test
Hint:
by this test, it can be determined whether the trouble is within
the electrical circuit or is a mechanical problem in the transaxle.
Disconnect the transmission wire connector.
inspect the manual driving operation.
Check that the shift and g ...
The ambient temperature does not display
Wiring diagram
Inspection procedure
1 Inspect outer ambient temperature sensor
Remove cooler (ambient temp. Sensor) thermistor.
measure resistance between terminals 1 and 2 of cooler
(ambient temp. Sensor) thermistor connector at each temperature.
Resistance:
at 0 c (0 f) ...
