Toyota Corolla (E120) 2002–2008 Repair Manual / Automatic transmission / trans / Speedometer sensor (atm)
Toyota Corolla (E120): Speedometer sensor (atm)
Replacement
1. Remove air cleaner case
2. Remove air cleaner hose no.1
3. Remove speedometer sensor
- disconnect the connector.
- remove the bolt and speedometer sensor assembly.
- remove the clip and driven gear from the speedometer sensor.
4. Install speedometer sensor
- Coat a o–ring with atf and install it to the speedometer sensor.
- install the driven gear to the speedometer sensor with the clip.
- install the speedometer sensor assembly with the bolt.
Torque: 11.3 N·m (115 kgf·cm, 9 ft·lbf)
- connect the connector.
5. Install air cleaner hose no.1
6. Install air cleaner case
torque: 7.0 Nvm (71 Kgf·cm, 62 in.Vlbf)
Other materials:
Inspection procedure
1 Check side squib(rh) circuit(airbag sensor assy center – front
seat airbag assy rh)
Disconnect the negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
disconnect the connectors between the airbag sensor
assy center and the front seat airbag assy ...
Throttle body assy
Components
Removal & installation and disassembly & reassembly
1. Drain coolant
2. Remove cylinder head cover no.2
Remove 2 nuts, 2clips and the cylinder head cover no. 2.
3. Remove air cleaner cap sub–assy
Disconnect the maf connector.
disconnect the vsv co ...
Replacement
Hint: components:
1. Discharge refrigerant from refrigeration system
sst 07110–58060 (07117–58080, 07117–58090, 07117–78050, 07117–88060,
07117–88070,
07117–88080)
2. Disconnect cooler refrigerant suction
hose no.1
Remove the bolt and disconnect the cooler refriger ...