Toyota Corolla (E120): Side mudguard sub–assy lh

Replacement

Hint

: use the same procedures for the rh side and lh side.

1. Remove side mudguard sub–assy lh

  1. Using a clip remover, remove the 8 retainers and 9 clips.
  2.  using a moulding remover, remove the mudguard.

2. Install side mudguard sub–assy lh

  1. Install the mudguard with 9 new clips.
  2.  install the 8 retainers to the mudguard.
    Share this page:

    Other materials:

    Dialing from call histories
    1 Select “All calls”, “Missed calls”, “Incoming calls” or “Outgoing calls” using . 2 Select the desired number using and press the off-hook switch. The following operations can be performed: ● Registering a number as a speed dial Press (Add S. Dial) and then press an ...

    Tire & wheel
    Wheel and tire system Inspection 1. Inspect tire  check the tires for wear and proper inflation pressure. Cold tire inflation pressure: Using a dial indicator, check the tire runout. Tire runout: 3.0 Mm (0.118 In.) Or less 2. Rotate tire Hint: see the illustration ...

    Inspection procedure
    Hint Advanced timing over (valve timing is out of specified range) P0011 Retarded timing over (valve timing is out of specified range) P0012 If dtc p0011 or p0012 is displayed, check the vvt system circuit. Read freeze frame data using the hand–held tester o ...