Toyota Corolla (E170): Selecting a folder

■ Selecting a folder

Press ) or  ( () or  ( ) or ) to select the desired folder. ( ■ Selecting a folder and file from a folder list) to select the desired folder.

■ Selecting a folder and file from a folder list

1 Press A folder list will be displayed..

A folder list will be displayed.

2 Turn and press and a file. to select a folder and a file.

To return to the previous display, press ■ Returning to the first folder (BACK).

Returning to the first folder

Press and hold ) until you hear a beep. ( Scanning folders) until you hear a beep.

    Share this page:

    Other materials:

    Inspection procedure
    1 Inspect transmission wire(slt) Disconnect the transmission wire connector from the transaxle. measure the resistance according to the value(s) in the table below. Standard: Measure the resistance according to the value(s) in the table below. Standard (check for short): ...

    Starting the engine
    ► Automatic transmission or continuously variable transmission 1 Check that the parking brake is set. 2 Check that the shift lever is set in P. 3 Firmly depress the brake pedal. 4 Turn the engine switch to the “START” position and start the engine. ► Manual transmission 1 Che ...

    Diagnostic trouble code chart
    Notice: when removing the part, turn the ignition switch to off. Hint: using sst 09843–18040, it connect the terminal tc and cg of dlc3. If any abnormality is not found when inspecting parts, inspect the ecu and ground points for poor contact. If a malfunction code is displayed during ...