Toyota Corolla Repair Manual: Seat belt buckle switch (lh) malfunction
Dtc b0126/27 seat belt buckle switch (lh) malfunction
Dtc b0127/27 seat belt buckle switch (lh) malfunction
Inspection procedure
1 Check side squib(lh) circuit(airbag sensor assy center – front
seat airbag assy lh)
Disconnect the negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
...
Circuit description
The seat belt buckle switch (lh) circuit consists of the airbag sensor assy
center and front seat inner belt
assy (lh).
Dtc b0126/b0127/27 is recorded when a malfunction is detected in the seat ...
Other materials:
Circuit description
Refer to dtc p0130
Dtc no.
Dtc detection condition
Trouble area
P0133
After engine has been warmed up, if response time that heated
oxygen sensor’s output voltage reaches from rich to lean.
Or from lean to rich, is 0.6 Second or more during idling.
(2 ...
Antenna cord sub–assy
Replacement
Hint: components:
1. Remove instrument panel sub–assy upper
Hint:
refer to the procedure until the step, ”remove instrument panel sub–assy
upper” of
instrument panel sub–assy lower.
Remove the related parts as long as the antenna cord sub–assy can be
removed.
2. Remo ...
Circuit description
A thermistor is built in the engine coolant temperature sensor and changes
the resistance value according
to the engine coolant temperature.
The structure of the sensor and connection to the ecm is the same as those of
the intake air temperature
sensor.
Hint:
if the ecm detects the dtc ...
