Toyota Corolla (E120): Replacement

Hint

: components:

1. Precaution

2. Disconnect battery negative terminal

3. Remove horn button assy

  1. Place the front wheels facing straight ahead.
  2.  using a torx socket wrench (t30), loosen the 2 torx screws until the groove along the screw circumference catches on the screw case.

  1. Pull out the horn button assy from the steering wheel assy.
  2.  using a screwdriver, release the lock part of each airbag connector and disconnect the 2 airbag connectors.

4. Inspect horn button assy

5. Install horn button assy

  1.  connect the airbag connectors and horn connector.
  2.  install the horn button assy after confirming that the circumference groove of the torx screws is caught on the screw case.
  3.  using a torx socket wrench (t 30), install the 2 screws.

    Torque: 8.8 Nvm (90 kgfvcm, 78 in.Vlbf)

6. Inspect srs warning light

    Share this page:

    Other materials:

    Front passenger occupant classification system
    Your vehicle is equipped with a front passenger occupant classification system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger. 1 SRS warning light 2 Seat belt reminder light 3 “AIR BAG OFF” indicator light ...

    Spiral cable sub–assy
    Components Replacement Hint: components: 1. Precaution 2. Disconnect battery negative terminal 3. Place front wheels facing straight ahead  check that the front wheels are facing straight ahead. 4. Remove horn button assy 5. Remove steering wheel assy  sst 09950–50013 ...

    Check and replace ecu
    Notice: start an inspection of the connector from the backside of the connector on the wire harness side with the connector connected to the ecu. When no measurement condition is specified, perform the inspection with the engine stopped and also the ignition switch on. First check the ec ...