Toyota Corolla (E120): Replacement

Hint

: components:

1. Remove floor shift shift lever knob sub–assy

2. Remove console panel upper

3. Remove parking brake hole cover sub–assy

4. Remove console box sub–assy rear

5. Separate floor shift cable transmission control shift

  1. Separate the end of the shift cable from the shift lever assy.

  1. Using a screwdriver, release the cable outer spring.
  2.  turn the lock, separate the shift cable from the shift lever retainer.

6. Separate floor shift cable transmission control select

  1. Separate the end of the select cable from the shift lever assy.

  1. Using a screwdriver, release the cable outer spring.
  2.  turn the lock, separate the select cable from the shift lever retainer.

7. Remove floor shift shift lever assy

  1. Remove the 4 bolts and shift lever assy.

8. Install floor shift shift lever assy

  1. Install the shift lever assy with the 4 bolts.

    Torque: 12 nvm (120 Kgf·cm, 9 ft·lbf)

9. Connect floor shift cable transmission control shift

  1. Connect the shift cable to the retainer of shift lever assy, turn the lock.

    Notice

    : the projecting part of the lock should face upward when the shift cable is installed.

  2.  install the cable outer spring to the lock.

    Notice

    : make sure that after installation the cable outer spring is moved to the place shown in the illustration.

  1. Connect the end of the shift cable to the shift lever assy.

10. Connect floor shift cable transmission control select

  1.  connect the select cable to the retainer of shift lever assy, turn the lock.

    Notice

    : the projecting part of the lock should face upward when the select cable is installed.

  2.  install the cable outer spring to the lock.

    Notice

    : make sure that after installation the cable outer spring is moved to the place shown in the illustration.

  1. Connect the end of the select cable to the shift lever assy.
    Share this page:

    Other materials:

    Calling the message sender
    Calls can be made to an e-mail/SMS/MMS message sender's phone number. 1 Display the “Message Inbox” screen. 2 Select the desired message. 3 Select . 4 Check that the “Call” screen is displayed. ■ Calling from a number within a message Calls can be made to a number identified ...

    Luggage door hinge torsion bar rh
    Replacement Hint: installation is in the reverse order of the removal. But the installation is indicated only when it has a point. In the lh side, work in the same procedure as in the rh side. Since the removal of the torsion bar will cause no tension, operation of opening and closi ...

    Bluetooth®
    ■When using the Bluetooth® audio system ●In the following situations, the system may not function. • The portable player does not support Bluetooth® • The cellular phone is located outside the service area • The Bluetooth® device is switched off • The Bluetooth® device h ...