Toyota Corolla (E120) 2002–2008 Repair Manual / Rear suspension / Rear wheel alignment
Toyota Corolla (E120): Rear wheel alignment
Inspection
1. Inspect tire
2. Measure vehicle height
Notice
: before inspecting the wheel alignment, adjust the vehicle height to the specified value.
3. Inspect toe–in
Toe–in: usa, canada:
Mexico:
If the toe–in is not within the specified value, inspect and replace the suspension parts as necessary.
4. Inspect camber
- install the camber–caster–kingpin gauge or position vehicle on wheel alignment tester.
- inspect the camber.
Camber:
If the measured value is not within the specified value, inspect the suspension parts for damage and/or wear and replace them if necessary become camber is not adjustable.
Other materials:
Circuit description
The vehicle equipped with abs detects a vehicle speed using the stability
control ecu and wheel speed
sensor. This sensor monitors a wheel rotation speed and sends the signal to the
ecu.
The stability control ecu converts these wheel speed signals into a 4–pulse
signal and outputs it to ...
Child restraint systems
Before installing a child
restraint system in the vehicle,
there are precautions
that need to be observed,
different types of child
restraint systems, as well as
installation methods, etc.,
written in this manual.
Use a child restraint system
when riding with a small child
that cannot properly use a ...
Replacement
Hint: components:
1. Precaution
2. Disconnect battery negative terminal
3. Remove front door scuff plate rh
4. Remove rear door scuff plate rh
5. Remove front door opening trim rh
6. Remove rear door opening trim rh
7. Remove lap belt outer anchor cover
8. Remove center pillar garnis ...