Replacement
Description
When troubleshooting obd ii vehicles, the only difference
from the usual troubleshooting procedure is that you
need to connect the vehicle to the obd ii scan tool complying
with sae j1978 or the hand–held tester, and read
various data output from the vehicle’s ecm.
Obd ii regulations re ...
Replacement
1. Disconnect battery negative terminal
2. Remove engine under cover rh
3. Remove starter assy
Disconnect the starter connector.
open the terminal cover.
remove the nut, then disconnect the starter wire.
remove the 2 bolts, then remove the starter.
4. Install starter a ...
Overhaul
1. Drain clutch fluid
2. Remove brake master cylinder sub–assy
3. Remove brake booster assy
4. Disconnect clutch reservoir tube
Loosen the clip and disconnect the clutch reservoir tube
from the clutch master cylinder assy.
Hint:
use a container to catch the fluid.
5. Disconnect c ...